Kenwood PKT-23 Instruction Manual

Also see for PKT-23: Specifications Brochure & specs Instruction manual Easy programming instructions Easy programming instructions

Contents

iiPRECAUTIONS• Do not charge the transceiver and battery pack when they are wet.• Ensure that there are no metallic items located between thetransceiver and the battery pack.• Do not use options not specifi ed by KENWOOD.• If any transceiver part is damaged, do not touch the damaged parts.• If a headset or headphone is connected to the transceiver, reducethe transceiver volume. Pay attention to the volume level whenturning the squelch off.• Do not place the cable of the clip microphone with earphone/hangeraround your neck while near machinery that may catch the cable.• Do not place the transceiver on unstable surfaces. If the transceiverswitches OFF/ON as a result of falling or hard impact, the volumeand channel configurations may reset.• Ensure that the end of the antenna does not touch your eyes.• Do not immerse the transceiver in water.• Always switch the transceiver power off before installing optionalaccessories.• The charger is the device that disconnects the unit from the ACmains line. The AC plug should be readily accessible.• To dispose of batteries, be sure to comply with the laws andregulations in your country or region.• If a commercially available neck strap is used, take care not to letthe strap get caught on nearby machine.