Kenwood ProTalk TK-3701D User Manual

Also see for ProTalk DIGITAL TK-3701D: User manual Service manual

14FREQUENCY SETUP1 During Setup Mode Selection, rotate the Selector to select a channel number.• The transceiver announces the zone number and channel number.2 Press the Side 1 or Side 2 button to select the Frequency Setup Mode.• The transceiver announces “Channel”.3 Press the PTT switch to enter the Frequency Setup Mode.4 Press the Side 1 or Side 2 button to increment/ decrement the frequency tablenumber, to select the new channel frequency.• Voice announcement: “Analogue Table X” (X = 1 to 16 for AnalogueFrequency).• Voice announcement: “Digital Table X” (X = 1 to 32 for Digital Frequency).• Table numbers and their corresponding operating frequencies are providedin the table {p. 15}.• A voice announcement will inform you of the currently selected frequencytable number.5 Press the PTT switch to temporary save the selected frequency table number.• Beep B (2 beeps) will sound.• Repeat steps 1 to 5 to set up another channel.6 Press the Side 1 or Side 2 button to select the Confirmation Setup Mode.• The transceiver announces “Confirm”.7 Press the PTT switch to save the settings and return to the Zone Selection.• Beep B (2 beeps) will sound.8 Turn the transceiver power OFF and then ON again to activate the new settings.Note:◆ If no action is performed for 20 seconds, the transceiver will automatically return tonormal operation without changing any settings.