TIMER DISPLAYSLEEPMODEFLAT TONEENTERTUNINGRANDOM REPEAT P.MODEAUTO / MONOVOLP.CALLTUNER D.AUDIO CDBANDAUX PHONO TAPED-IN1 D-IN2 D-IN3ROOM EQMUTECLEARDIMMERMODESOUNDPRESETR-K100028 R-K1000Up to 40 stations can be preset in the system.For use of the RDS function, stations must be memorized by AUTO MEMORY.zzPress the [MODE] key.1Press the [ENTER] key.Presetting Stations Automatically (AUTO MEMORY)“AUTO MEMORY” flashes on the displayand the receivable radio stations are presetautomatically.A preset frequency can be rewritten later.zzRDS stations are given priority during auto presetting. If there is memory leftafter presetting, this unit continues presetting regular FM and AM stations.A broadcast station that cannot be preset with AUTO MEMORY should be setwith Manual preset. (P. 29)Auto Memory setup may take a few minutes to complete.zzzPress the [A] or [B] key.Select “AUTO MEMORY”.2Receiving Broadcast Stations20 R-K1000While this system can be controlledfrom either the remote control orthe main unit, the explanationsin this manual primarily describeoperation procedures using theremote control.Operation procedureThe displays shown in this instructionmanual may differ from the actualdisplays.zDisplay shown duringor after an operationRemote control keysused in the procedureHow to Use This Manual