Kenwood SLG-7 Instruction Manual

Contents

Kenwood SLG-7 Instruction Manual Manual pdf 17 page image

English17If the audio is not outputIf the audio is not output or the volume is very low while the PC is playing songs, adjustthe playback volume in the following procedure (which describes the example ofoperation on Windows XP).1 Select [Start] - [Setup] - [Control Panel].2 Double-click on [Sound and Audio Devices Properties].3 Select the [Audio] tab, open the [Predefined Devices] drop-down listin the [Sound Playback] field and select [KENWOOD Wireless Audio].Select [KENWOOD Wireless Audio].4 Click on [Volume].5 Uncheck the [Mute] checkbox and adjust the volume.• The volume can also be adjusted by selecting [Start] – [Control Panel] – [Sound and AudioDevices Properties] – [Volume] tab on the PC connected to the Transmitter or on the audiocomponent connected to the Receiver. The simplest operation is to adjust the volume onthe audio component while the playback volume of the PC set at the maximum level.• No audio is output from the PC speakers when the Transmitter is connected to the PCthrough the USB cable.