Kenwood SPECTRUM 350 Setting Up

Also see for DP-R896: Setting up User guide Setting up Install guide Install guide

Kenwood SPECTRUM 350 Setting Up Manual pdf 14 page image

Using the AM indoor loop antenna (supplied)Place the antenna as far away as possible from the main system, television,speaker wires and power cords.Rotate the antenna until you get the best reception.Using the FM indoor antenna (supplied)Use this antenna until you can install an outdoor antenna. When you do,remove the indoor antenna.1 Remove the insulation from the wire tip, and twist the wire tightly to getrid of any loose strands.2 Connect the end of the wire to the left-most antenna jack on the receiver.3 Fully extend the antenna, and place it along a wall or bookshelf.4 Adjust the antenna to find the position that provides the best reception.5 Attach the looped end to the wall or bookshelf.The quality of your FM/AM recep-tion depends on how well you placeyour antennas. So please follow theinstructions carefully.Connecting the antenna wiresto the antenna jacks1 Unlock lever2 Insert wire3 Lock leverConnecting your antennas14.FM75Ω LOOP ANTENNAFM300ΩGND AMANTENNAFM75Ω LOOP ANTENNAFM300ΩGND AMANTENNA