Kenwood TH-D75A User Manual

Also see for TH-D75A: User manual Operating Tips

8[ ]Press [ ] (1s) to turn the transceiver power ON and OFF.Press [ ] to turn the backlight ON and OFF when thetransceiver power is ON.The backlight turns OFF when the backlight timer elapses.When the voice guidance function is not set to OFF, thevoice announces the operating states of the transceiver.When pressing [ ] while announcing, the voice stops.[MONI]Press and hold [MONI] to unmute the speaker in order tomonitor signals.Release [MONI] to return to normal operation.Press [F], [MONI] to enter the Squelch level adjustmentmode.[PTT]Press and hold [PTT], then speak into the microphone totransmit.[ENC] ControlRotate the [ENC] control to select an operating frequency,Memory channel, Menu item, setting value and change thescan direction, etc.[VOL] ControlRotate the [VOL] control to adjust the speaker volume.Multi-Scroll Key[ ], [ ]Press [ ] or [ ] to select an operating frequency,Memory channel, Menu item, setting value or to change thescan direction, etc.Press and hold [ ] or [ ] to change an operatingfrequency, Memory channel, Menu item, setting value, etc.continuously.[ ]Press and hold [ ] to select a frequency band in VFOmode.Press [ ] to move to the next step in various settingmodes.[ ]Press and hold [ ] to select a frequency band in VFOmode.Press [ ] to move back to the previous step in varioussetting modes.[ENT]Press [ENT] to enter frequency direct entry mode in VFOmode.Press [ENT] to complete the setting value and move to thenext step in Menu mode or various setting modes.[MODE]Press [MODE] to select the mode.Press [F], [MODE] in DV mode or DR mode to enter DigitalFunction Menu mode.This key operates the function displayed in the lower leftside. (Refer to page 15.)[MENU]Press [MENU] to enter Menu mode.Press [F], [MENU] to cycle the transmit output power.[A/B]Press [A/B] to select operation band A or B.Press [F], [A/B] to switch the Single band mode and Dualband mode.This key operates the function displayed in the lower rightside. (Refer to page 15.)[F]Press [F] to enter Function select mode.Press [F] (1s) to turn the transceiver Key lock function ONand OFF.12 Keypad[VFO] (1)Press [VFO] to enter VFO mode. In Memory channelor CALL channel, press [F], [VFO] to copy the currentMemory channel or Call channel to the VFO (memory shift).GETTING ACQUAINTEDKEY AND CONTROL KNOB OPERATIONSSpeakerMicrophoneLCD DisplaySP/MIC JacksmicroSD memory card slotUSB connector (USB Type-CTM)DC IN (External power supply) Jack