Kenwood TH-F6A Step-by-step Programming Manual

Also see for TH-F6A: Instruction manual Service manual Instruction manual Supplemental service manual Service manual

Kenwood TH-F6A Step-by-step Programming Manual Manual pdf 1 page image

Kenwood TH-F6A Step-by-Step Programming Guide Noji RatzlaffSet the radio to communicate with a repeater at 147.080+ MHz, 77.0 Hz0. Turn on the radio and make sure it’s unlocked1. Press VFO, then ENT2. Set the frequency1 - 4 - 7 - 0 - 8 - 03. If the + sign appears at the top, skip to step 74. Get into the menuM NU5. Go to AUTO OFFSET (item 5)6. Set the auto repeater shiftM NU - ON - M NU7. Set the transmit pow er levelPress LOW until H appears8. Press TONE repeatedly until T appears, thenF - TONE - 77.0 - OKYour radio is now set to transmit as specifiedStore and name the current repeater and tone settings in a memory channel0. Follow the procedure above to set your radiofor the frequency of your choice1. Press F2. Rotate the DIAL knob to select the channelnumber3. Press M NUThe frequency is now stored in radio memory4. Press M R to enter M emory mode, then selectthe channel you want named5. Enter the name editorF - 96. Turn the knob until your letter of choiceappears, then press OK to move to the nextletter7. Press OK to conclude editingThe stored memory channel now has a nameRecall a stored memory setting1. Press M R2. Turn the knob until you reach the desired channelThe stored channel is now ready for use

/ 2

Related manuals for Kenwood TH-F6A