Kenwood TK-2168 Service Manual

TK-21685DISASSEMBLY FOR REPAIR/ /Ω≈, Packing1. Separating the case assembly from the chassis.1. Remove the volume knob z.2. Remove the two screws x.3. Lift the chassis c, and remove it from the case assembly.Note: After separating the case assembly from the chassis,remove the channel knob.2. Separating the chassis from the TX/RX unit.1. Remove the two screws v fixing the TX/RX unit B/2.2. Remove the twelve screws b and two screws n fixingthe TX/RX unit A/2.3. Remove the solder from the antenna terminal using asoldering iron m, then lift the unit off.zxxcChannel knob≈m,.v vbbb b bbbnTX/RX UNIT B/2TX/RX UNIT A/23. How to remove the battery terminal block.1. Remove the two screws /, then pull out the back cover Ω.2. Remove the screw ≈.Note: To remove the TX/RX unit B/2, remove the solder usinga soldering iron ..Note: The two screws n of TX/RX unit A/2 are fixing thebattery terminal block ,.