Kenwood TK-2180 Instruction Manual

Also see for TK-2180: Specifications Brochure & specs Instruction manual Service manual Pricing and specification manual

41CLOCKIf activated by your dealer, your transceiver can track the timeand date with its built-in clock. The time will displaymomentarily when the transceiver power is turned ON.Additionally, you can view the clock any time by pressing thekey programmed as Clock.Note: Removing the battery pack or leaving the battery packuncharged for extended periods will cause the clock time to clear.■ C LOCK SETUPTo set the year, month, day, and time:1 With the transceiver power OFF, press and hold theC> key while turning the transceiver power ON.• The current year setting appears.2 Rotate the selector to select the year, then press theS key to cycle to the month setting.• Repeat this step, to cycle through the day, hour, andminute settings.3 Press the S key again, to return to the year setting.• A triple beep will sound, indicating that your selectionshave been set into the transceiver memory.4 Turn the transceiver power OFF and then back ON toreturn to Normal Operation Mode.BACKLIGHTTo turn the transceiver display backlight on, press the keyprogrammed as Backlight.• Pressing any key other than the PTT switch and the Powerswitch/ Volume control while the backlight is on will reset thelamp timer, allowing the backlight to remain lit for an additional5 seconds.To turn the display backlight off immediately, press theBacklight key while the backlight is on.