Kenwood TK-2300 Manual

Also see for TK-2300: Instruction manual Instruction manual

Contents

23■ Scanscan is useful for monitoring signals on the transceiverchannels. When scanning, the transceiver checks for asignal on each channel and only stops if a signal is present.if the QT/DQT matches, the transceiver stops at the channeland opens the squelch so you can listen to the call. if theQT/DQT does not match, the call is ignored and scanningcontinues.■ Scan + Temporary Delete (Side 2 key default)Press this key to start scanning the transceiver channels.When scan pauses at an undesired channel, you canremove that channel from the scanning sequence bypressing and holding this key for 3 seconds.■ ScramblerPress this key to activate (a single beep sounds) anddeactivate (a double beep sounds) the scrambler function ofthe selected channel.The scrambler function allows you to hold a conversation incomplete privacy. When the scrambler function is activated,any other party that is listening to your channel will beunable to understand your conversation.■ Squelch OffPress this key to hear background noise. Press the keyagain to return to normal operation.■ Squelch Off MomentaryPress and hold this key to hear background noise. releasethe key to return to normal operation.■ Temporary DeleteWhen scan pauses at an undesired channel, you canremove that channel from the scanning sequence bypressing and holding this key for 1 second.

/ 3

Related manuals for Kenwood TK-2300