Kenwood TK-2302 Instruction Manual

Also see for TK-2302: Instruction manual Service manual Instruction manual

Contents

11BACKGROUND OPERATIONSTIME-OUT TIMER (TOT)The Time-out Timer prevents callers from using a channelfor an extended duration. If you continuously transmit for theduration programmed by your dealer (default is 1 minute),transmission will stop and an alert tone will sound. To stop thetone, release the PTT switch.BATTERY SAVERWhen activated by your dealer, the Battery Saver functiondecreases the amount of power used after no signal is presentand no operations are being performed for 5 seconds. When asignal is received or an operation is performed, Battery Saverturns off.Note: While the Battery Saver is operating, the LED may flashgreen when receiving a QT/DQT signal which does not match theQT/DQT tone/code set up in your transceiver.LOW BATTERY WARNINGWhile operating the transceiver, the Low Battery Warningsounds an alert tone every 30 seconds and the LED indicatorblinks red when the battery needs recharged or replaced.BUSY CHANNEL LOCKOUT (BCL)When activated, BCL prevents you from interfering on achannel that is already in use. Pressing the PTT switch willcause an alert tone to sound and the transceiver will nottransmit. Release the PTT switch to stop the tone.Note: Ask your dealer for an explanation on how BCL functionswhen using QT, DQT, DTMF, or FleetSync signaling.

/ 21

Related manuals for Kenwood TK-2302