Kenwood TK-2360 Instruction Manual

Also see for TK-2360: Instruction manual Service manual Instruction manual Instruction manual

Contents

PrIOrITy SCANif a priority channel has been programmed, the transceiverwill automatically change to the Priority channel when a call isreceived on that channel, even if a call is being received on anormal channelif the priority channel has been set as operator selectable byyour dealer, you can set a new channel as the Priority channelby selecting your desired channel and pressing the keyprogrammed as Priority Channel SelectTEMPOrAry CHANNEl lOCKOUTDuring scan, you can temporarily remove specific channelsfrom the scanning sequence by pressing the key programmedas Scan Temporary Delete while Scan is paused at theundesired channel• The channe s no onger scanned. However, when scann ng sended and restarted, the channe s are reset and de eted channe sw aga n be n the scann ng sequence.SCAN rEvErTThe Scan Revert channel is the channel selected when youpress the PTT switch to transmit during scan. Your dealer canprogram one of the following types of Scan Revert channels:• Selected: the last channel selected before scan• Selected + Talkback: same as “selected”, plus you canrespond to calls on the channel at which scan is paused.• Priority: the priority channel• Priority + Talkback: same as “priority”, plus you canrespond to calls on the channel at which scan is paused.• Last Called + Selected: The last channel on which youreceive a call or the last channel selected before scan,whichever operation occured latest.