Kenwood TK-280 Pricing And Specification Manual

Also see for TK-280: User manual Instruction manual Instruction manual Service manual Service manual

Nov-06Installation/Tuning Charges for the TK-280/380 Series RadiosModel Description List%start labor codesL-836 Assemble KMB-16 with six KSC-24's (Rapid Rate, 120 Volt version only) 15.00L-961 Assemble KMB-23 with six KSC-24/25/32 (Rapid Rate, 120 Volt versions only) 17.00L-855 TK-280/380 Programming (with basic TX/RX check) 25.00L-856 Configure TK-280/380 for Intrinsically Safe (Must Order KNB-17BK) 70.00L-980 Configure TK-280/380/480/481/385 (KNB-22NC for Intrisically Safe (Must Order KNB-22NC) 70.00L-901 Program and install QE-2 MDC1200 Encoder 75.00L-902 Program and install QE-2 G-Star® Encoder 75.00PassPort® Options (Kenwood-installed)FOR NEW RADIO ORDERS ONLYOrdering InstructionsModel Description ListL-938 Install PassPort® ESN options and firmware; NO CHARGE for new TK-280/380/780/880 ordersNote: Only current 80-Series Version 2.0 production radios (“Ver. 2.0” appears on FCC ID label) 0.00PassPort® Radio Programming SoftwareKPG-63DK PassPort® Radio Programming Software V2.00 or higher 65.00PassPort® Options (Field-installation kits)FOR DEALER / OPERATOR FIELD CONVERSIONSOrdering Instructions1. Order the ESN key/firmware Labor Code options: L-892, L-893 or L-894; specify model radio(s).Pre-loaded ESN hardware key(s) with the ordered quantities of ESN's and a PassPort® radio firmware diskette will be shipped (100 ESN’smaximum per hardware key). Important: Any depleted key previously registered to a technicians computer must be retained toregister any new purchased key to the computer; please retain the old key until the new one is received.2. Other required items:a. KPG-64D: PassPort® ESN Install Program: the KPG-64D only needs to be ordered one time. It is re-usable for subsequent ESN orders(unless an upgrade is recommended).b. KPG-63D Radio Programming Software: required to program all PassPort® parameters for all PassPort® enabled radios, the KPG-63D willnot program LTR or conventional parameters.c. KPG-49D Radio Programming Software: required only if LTR or conventional systems are also tbe programmed in the PassPort® radio.3. The KPG-49D radio programming software is required for LTR & conventional site programming 2.For VHF/UHF models TK-280/780/380/880 new radio orders, the Kenwood-installed PassPort® ESN / firmware option is no charge:Order the PassPort® ESN/Firmware option L-938 for each PassPort® radio.Other required items:a. KPG-63D Radio Programming Software: the KPG-63D is required to program all PassPort® parameters for all PassPort® enabledradios, the KPG-63D will not program LTR or conventional parameters.b. KPG-49D is required only if LTR or conventional systems are to also be programmed in the PassPort® radio.Page 4 of 5 TK-280_380

/ 5

Related manuals for Kenwood TK-280