Kenwood TK-285 Instruction Manual And User Handbook

Also see for TK-285: Service manual Service manual

14Viewing the Stack1 Press the Status/ Stack key (default is the A key)twice to enter the stack.• If there is no data in the stack, “------------” appears onthe main display and “-00” appears on the 3-digitsub-display.2 Rotate the Rotary encoder to view the stack entries.• “NEW” represents a new entry, “S” represents a statusstack entry, “V” represents a voice stack entry, and “D”represents a data stack entry.3 Press the C and D keys to scroll through theselected entry, to view the entire entry.4 To erase an entry, select the desired entry and pressthe Clear key.Call Diversionsn Diverting Your Own Calls1 Enter control code “ 41”.2 Press the key, then enter the unit numberwhere you want to divert the calls.3 Press the # or Call key.• “Calling” appears on the display. While yourrequest is being processed, “Holding” appears onthe display. When the call divert is set, “Complete”momentarily appears on the display beforereturning to the previously selected call address.The indicator appears on the display and flashes.