Kenwood TK-5210 Instruction Manual

Also see for TK-5210: Specifications Instruction manual Specifications Instruction manual Service manual

Contents

instruction manual

PREPARATIONINSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACKCAUTION:-DO NOT RECHARGE HE BATTERY PACK IF IT IS ALREADY FULLY CHARGED. DOING SO MAY CAUSETHE LIFE OF THE BATTERY PACK TO SHORTEN OR THE BATTERY PACK MAY BE DAMAGED.-AFTER RECHARGING THE BATTERY PACK, DISCONNECT IT FROM THE CHARGER. IF THE CHARGERPOWER IS RESET (TURNED ON AFTER BEING TURNED OFF), RECHARGING WILL START AGAIN ANDTHE BATTERY PACK WILL BECOME OVERCHARGED.-DO NOT SHORT THE BATTERY TERMINALS OR DISPOSE OF THE BATTERY BY FIRE.-NEVER ATTEMPT TO REMOVE THE CASING FROM THE BATTERY PACK.1 Match the four grooves of the battery pack with the corresponding guides on the back of the transceiver.2 Slide the battery pack along the back of the transceiver until the release latch on the base of the transceiverlocks.3 To remove the battery pack, pull back on the release latch and slide the pack away from the transceiver.