Kenwood TK-5710 Series Instruction Manual

Also see for TK-5710 Series: Instruction manual

5GETTING ACQUAINTED■ Basic Front Panel (KCH--14)qqqqq POWER switchPress to switch the power ON (or OFF).wwwww GRP (Group) keysPress GRP Up to increase the group selection by one step. Press GRPDown to decrease the group selection by one step. (See page 11 forother programmable functions for these keys.)eeeee TX, BUSY indicatorsThe TX (red) indicator lights while transmitting. The BUSY (green)indicator lights while the selected channel is in use.rrrrr Microphone connectorInsert the microphone plug into this connector and secure it using theattached screw. To remove the microphone, release the screw, then turnthe connector clockwise until it becomes free.ttttt VOL (Volume) controlTurn clockwise to increase the volume, and counterclockwise to decreaseit.yyyyy CH (Channel) controlTurn clockwise to increase the channel selection (default setting), andcounterclockwise to decrease it. (Alternatively, this control can beprogrammed with group up/down.)uuuuu PF1 keyiiiii PF2 keyooooo PF3 key!0!0!0!0!0 PF4 key!1!1!1!1!1 PF5 keyPress these PF (programmable function) keys to activatetheir programmable functions {page 11}. The default is setas No Function.GRPVOL CHPOWERTX BUSYqqqqq wwwwweeeeerrrrr ttttt yyyyy uuuuu iiiii ooooo !0!0!0!0!0 !1!1!1!1!1