Kenwood TK-6110 Brochure & Specs

Also see for TK-6110: Brochure & specs Service manual Service manual Instruction manual

Contents

specifications

ADS#43907 Printed in USAJQA-QMA1205All accessories and options may not be available in all markets.Contact an authorized Kenwood dealer for details and completelist of all accessories and options.Options SpecificationsModel TK-6110GENERALFrequency RangeType 1 29.7-37.0 MHzType 2 35.0-50.0 MHzNumber of Channels 32Channel Spacing20 kHz / 25 kHzChannel Step 5 kHzOperating Voltage 13.6 V DC ±15%Current DrainStandby < 0.6 AReceive < 2.4 ATransmit < 15 ADuty Cycle Transmit: 20%Operating Temperature Range -22˚f ~ +140˚f (-30˚c ~ +60˚c)Frequency Stability(-22˚ F - +140˚ F) ±0.0005%Antenna Impedance 50 ΩDimensions (W x H x D) 6-1/4 x 2 x 6-1/4 in.Projections not included (160 x 50 x 160 mm)Weight (net) 3.5 lbs. (1.6kg)FCC IDType 1 ALH29351110Type 2 ALH29351120IC CertificationType 1Type 2 282195666ARECEIVER (Measurements made per EIA/TIA-603)Sensitivity(12dB SINAD) 0.25μVSelectivity 75 dBIntermodulation Distortion 70 dBSpurious Response 70 dBAudio Output 10W at less than 5% distortionBand SpreadType 1 7.3 MHzType 2 15.0 MHzTRANSMITTER (Measurements made per EIA/TIA-603)RF Output Power 70 WType of Emission 16K0F3ESpurious Response 62 dBFM Hum & Noise 50 dBMicrophone Impedance 600 ΩAudio Distortion Less than 3%Band SpreadType 1 7.3 MHzType 2 15.0 MHz■ KMC-9CControl StationDesktop Microphone■ KMC-27AMicrophone(supplied microphone)■ KMC-27BMicrophone(MIL-SPEC noise-canceling)■ KMC-28AKeypad Microphone(MIL-SPEC noise-canceling)■ KCT-18Ignition Sense Cable■ KLF-2Line Noise Filter■ KES-5External SpeakerKenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice.Unavailable Frequencies:TK-6110K (29.7 - 37.0 MHz model): 33.60 MHzTK-6110K2 (35.0 - 50.0 MHz model): 42.00 MHzStandard MIL 810C MIL 810D MIL 810EMethods/Procedures Methods/Procedures Methods/ProceduresDust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure IVibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure IShock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IVApplicable MIL-STD

/ 2

Related manuals for Kenwood TK-6110