Kenwood TK-6110 Instruction Manual

Also see for TK-6110: Brochure & specs Brochure & specs Service manual Service manual

Contents

3■ Installing the TransceiverMicrophonehangerMicrophoneMicrophone cableMounting bracketAntennaconnectorTransceiverPower inputconnectorPower cableBatteryFuse holderFuseHex headedscrewRed wire1 Mark the position of the holes in the dash by using the mounting bracketas a template. Drill the holes, then attach the mounting bracket using thesupplied 5 x 16 mm screws.• Be sure to mount the transceiver in a location where the controls will be withineasy reach of the user and where there is sufficient space at the rear of thetransceiver for cable connections.2 Connect the antenna and the supplied power cable to the transceiver.3 Slide the transceiver into the mounting bracket and secure it using thesupplied hex-headed screws.4 Mount the microphone hanger, using the supplied 4 x 16 mm screws, in alocation where it will be within easy reach of the user.• The microphone should be mounted in a place where it will not interfere withthe safe operation of the vehicle.5 Connect the microphone cable to the jack on the front panel of thetransceiver. Place the microphone on the hanger.FOR PASSENGER SAFETY, INSTALL THE TRANSCEIVER SECURELY, USING THESUPPLIED MOUNTING BRACKET, SO THE TRANSCEIVER WILL NOT BREAK LOOSE INTHE EVENT OF A COLLISION.Black wire