Kenwood TK-7108 Instruction Manual

Also see for TK-7108: Service manual Service manual

Contents

9CODE SQUELCH (ID CODE)Code Squelch is enabled or disabled by your dealer. This function turns thetransceiver squelch OFF only when it receives the DTMF code that has been setup in your transceiver. Transceivers that do not transmit the correct code will notbe heard. Consequently, you can communicate with a specific party withoutlistening to other parties using the same channel.Your dealer may also activate Group Call for your transceiver. This is usefulwhen you want to send information to a number of units in a fleet. Ask yourdealer for details.R ECEIVINGWhen you receive a signal containing the correct code, Code Squelch turns OFFand you will hear the call.ï To mute the speaker after Code Squelch turns OFF, press the key programmed asMonitor.ï Your dealer can program Code Squelch to automatically turn back ON after a specifictime period elapses.ï If Transpond is programmed, an acknowledgment signal is returned to the callingstation. Transpond does not function when you are called with a Group code.Transpond can send an alert tone or a transceiver ID code.ï If Call Alert is programmed, an alert tone will sound when the correct code is received.TRANSMITTING1 Press and hold the PTT switch.2 Enter the code of the transceiver you want to call or enter a Group code onthe microphone keypad.ï If desired, you can send codes the same way you make DTMF calls {page 8}.3 Use the transceiver the same as in a regular call; press the PTT switch totransmit and release it to receive.ï The called transceiverís Code Squelch will turn OFF while you are transmitting.After you stop transmitting, the Code Squelch will turn back ON after a pre-set timeperiod elapses. This time period is programmed by your dealer.ï When you release the PTT switch, Code Squelch turns OFF. If no signal isreceived for a pre-determined time, Code Squelch turns back ON.ï Pressing the key programmed as Monitor at any time will turn the Code Squelchback ON.

/ 15

Related manuals for Kenwood TK-7108