Kenwood TK-7180 Service Manual Addendum

Also see for TK-7180: Modification Information Function reference Brochure & specs Specification Service manual

Contents

TK-7180/7189/8180/818912ControlsPanel Test Mode■ Test mode operation featuresThis transceiver has a test mode.To enter test mode,press [A] key and turn power on. Hold [A] key until fre-quency version appears on LCD. Test mode can be inhib-ited by programming. To exit test mode, switch the poweron again. The following functions are available in test mode.■ Key operationKey“FNC” not appearsFunction Display[S] Shifts to Panel tuning mode -[A] Function on “FNC” appears[B] MSK 1200bps and 2400bps 2400bps : icon appears[C] Test signaling CH up Signaling No.[ ]/[ ] Test frequency CH up/down Channel No.[ ]/[ ] Volume up/down -[ ] Squelch on/off[■ ] Narrow/Wide Narrow : “n”Wide : “w”[0] to [9] Use as the DTMF keypad. -and [#], If a key is pressed during[✳] *1 transmission, the DTMFcorresponding to the keythat was presses is sent.Microphone key[PTT] Transmit -[0] to [9] Use as the DTMF keypad. -and [A], If a key is pressed during[B], [C], transmission, the DTMF[D], [#], corresponding to the key[✳] that was presses is sent.*1 : TK-7189 and TK-8189 models onlyKey “FNC” appearsFunction Display[S] High power / Low power Low : icon appears[A] Function off -[B] Compander on/off On : icon appears[C] Beat shift on/off On : icon appears[ ]/[ ] Function off -[ ]/[ ] Function off -[ ] Squelch level 0 On : icon appears[■ ] LCD all lights LCD all point appears[0] to [9] Function off -and [#],[✳] *2Microphone key[PTT] Transmit -[0] to [9] Function off -and [A],[B], [C],[D], [#],[✳]*2 : TK-7189 and TK-8189 models onlyNote:If a [S], [A], [B], [C] key is pressed during transmission, theDTMF corresponding to the key that was pressed is sent.• LED indicatorRed LED Lights during transmission.Green LED Lights when there is carrier.• Sub LCD indicator“FNC” Appears at function on.• LCD display in panel test modePowerswitchModularMIC jackProgrammablefunction keysVolumeUp/Down keyChannelUp/Down keyLCDn 1 1–Channel No.n : Narroww : WideSignaling No.ADJUSTMENT