Kenwood TK-7302 Instruction Manual

Also see for TK-7302: Instruction manual Service manual Instruction manual Instruction manual Instruction manual

Contents

9FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTIONFleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned byKenwood Corporation.Note: If set up by your dealer, your transceiver may use the MDC-200 feature in place ofFleetSync. MDC-200 and FleetSync cannot be operated simultaneously.SelcAll (SelectiVe cAlling)A Selcall is a voice call to a particular station or to a group of stations.n Transmitting1 Select your desired zone and channel.2 Press the microphone PTT switch and begin your conversation.n ReceivingIf enabled by your dealer, an alert tone will sound and the LED will blink whena Selcall has been received.To respond to the call, press the PTT switch and speak into the microphone.n Identification CodesAn ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.Each transceiver must have its own Fleet and ID number.Note: The ID range may be limited by programming.pAging cAll1 Select your desired zone and channel.2 Press and hold the key programmed as Paging Call for second to transmityour PTT List ID, to request a call.StAtuS meSSAgeYou can transmit pre-programmed status messages by pressing the keysprogrammed as Status 1 and Status 2.Status messages are 2-digit codes ranging from 0 to 99 (80 ~ 99 are reservedfor special messages).• “dt” appears on the display when sending a status message. “Ed” appears on thedisplay when receiving an acknowledgement. “Er” appears on the display during statusmessage no reply.gpS reportIf a GPS unit (NMEA-083 format) is installed on your transceiver, you can pressthe key programmed as Send the GPS data to send your location data.