Kenwood TK-7302 Instruction Manual

Also see for TK-7302: Instruction manual Instruction manual Service manual Instruction manual Instruction manual

Contents

7SCAN REVERTThe Scan Revert channel is the channel selected when you press the PTT switchto transmit during scan. Your dealer can program one of the following types ofScan Revert channels:• Selected: The last channel selected before scan.• Selected + Talkback: Same as “Selected”, plus you can respond to calls on thechannel at which scan is paused.• Priority: The Priority channel.• Priority + Talkback: Same as “Priority”, plus you can respond to calls on the channelat which scan is paused.• Last Called + Selected: The last channel on which you receive a call or the lastchannel selected before scan, whichever operation occured latest.DTMF CALLSNote: To make DTMF calls, you must use an optional microphone with a DTMF keypad.MANUAL DIALING1 Press and hold the PTT switch.2 Enter the desired digits using the keypad.• If Keypad Auto-PTT is enabled by your dealer, you do not need to press the PTTswitch to transmit; you can make the call simply by pressing the keys.AUTODIALAutodial allows you to quickly call DTMF numbers that have been programmedonto your transceiver.1 Press the key programmed as Autodial or the microphone key.• “Ad” appears on the display.2 Enter the desired memory location number (1 ~ 9).3 Press the PTT switch to make the call.REDIALING1 Press the key programmed as Autodial or the microphone key.• “Ad” appears on the display.2 Press the microphone 0 key.• “rd” appears on the display.• If there is no data in the redial memory, an error tone will sound.3 Press the PTT switch to make the call.Note: Switching the transceiver power OFF clears the redial memory.