Kenwood TK-7360 Instruction Manual

Also see for TK-7360: Instruction manual Brochure & specs Specifications Service manual Instruction manual

Contents

ScAn delete/AddYou can add and remove zones and/or channels/group IDs to and from your scanlist.1 Select your desired zone and/or channel/group ID.2 Press the key programmed as Scan Delete/Add to remove a channel or pressand hold the key for approximately second to remove a zone.• When a channel is added to scan, the icon appears on the display.• When a zone is added to scan, the icon appears on the display.ScAn reVertThe Scan Revert channel is the channel selected when you press the PTT switchto transmit during scan. Your dealer can program one of the following types ofScan Revert channels:• Selected: The last channel selected before scan.• Selected + Talkback: Same as “Selected”, plus you can respond to calls on thechannel at which scan is paused.• Priority: The Priority channel.• Priority + Talkback: Same as “Priority”, plus you can respond to calls on the channelat which scan is paused.• Last Called + Selected: The last channel on which you receive a call or the lastchannel selected before scan, whichever operation occured latest.DTMF CALLSNote: To make DTMF calls, you must use an optional microphone with a DTMF keypad.mAnuAl diAling1 Press and hold the PTT switch.2 Enter the desired digits using the keypad.• If Keypad Auto-PTT is enabled by your dealer, you do not need to press the PTTswitch to transmit; you can make the call simply by pressing the keys.AutodiAlAutodial allows you to quickly call DTMF numbers that have been programmedonto your transceiver.1 Press the key programmed as Autodial.2 Press / (if the key assignment list selection is configured as “Enabled”) or/C> to select an autodial list number.• You can also enter a number from 0 ~ 6 directly using the keypad.3 Press the PTT switch to make the call.