Kenwood TK-7360 Instruction Manual

Also see for TK-7360: Instruction manual Brochure & specs Specifications Instruction manual Service manual

Contents

9A UTODIALAutodial allows you to quickly call DTMF numbers that have been programmedonto your transceiver.1 Press the key programmed as Autodial.2 Press / to select a number.• You can also enter a number from 01 ~ 10 directly using the keypad.3 Press the PTT switch to make the call.Q Storing an Autodial Entry1 Press the key programmed as Autodial Programming.2 Press / to select a memory location number.3 Press S or to enter a name for the list number.4 Press / to select a digit.5 Press C> to accept the entered digit and move the cursor to the right.• Press A or # to delete an incorrect digit. Press and hold A or # to delete alldigits.6 Repeat steps 4 and 5 to enter the entire name.7 Press S or to accept the name and enter a number.8 Press / to select a digit.• You can also enter digits directly using the keypad.9 Press C> to accept the entered digit and move the cursor to the right.• Press A or # to delete an incorrect digit. Press and hold A or # to delete alldigits.10 Repeat steps 8 and 9 to enter the entire number.11 Press S or to accept the number and store the entry.Q Removing an Autodial Entry1 Press the key programmed as Autodial Programming.2 Press / to select a memory location number.3 Press A or #.• “DELETE” appears on the display.• Additionally, you can press and hold A or # to delete all entries.4 Press S or WRFRQÀUPWKHGHOHWLRQR EDIALING1 Press the key programmed as Autodial.2 Press , then 0.• If there is no data in the redial memory, an error tone will sound.3 Press the PTT switch to make the call.