Kenwood TK-780 Instruction Manual

Also see for TK-780 series: Programming instructions Service manual supplement Service manual Instruction manual Service manual

Contents

12SELCALL (SELECTIVE CALLING)A Selcall is a voice call to a particular station or to a group of stations.■ Transmitting1 Select your desired group and channel.2 Press the key programmed as Selcall Entry or Selcall List to enterSelcall Mode.3 a) If you pressed Selcall Entry and Manual Dial is enabled, enter the ID ofthe station you want to call by using the microphone keypad. (Press # toerase an incorrect digit.)b) If you pressed Selcall List, use the / keys (right side keysonly) to select your desired ID.4 Press the PTT switch and begin your conversation.■ ReceivingAn alert tone will sound, the transceiver will automatically enter Selcall Mode,and the calling stationís ID will appear when a Selcall is received.To respond to the call, press the PTT switch and speak into the microphone.■ Identification CodesAn ID code is a combination of a 3-digit Fleet number and a 4-digit IDnumber. Each transceiver must have its own Fleet and ID number.ï Enter a Fleet number (100 ~ 349) to make a fleet call.ï Enter an ID number (1000 ~ 4999) to make an individual call in your fleet.ï Enter a Group ID (which is programmed in the FPU) to make a group call.ï Enter a Fleet number followed by an ID number to make an individual call in yourdesired fleet (Inter-fleet call).ï Select ìALLî Fleet and ìALLî ID to make a call to all units (Broadcast call).ï Select ìALLî Fleet and enter an ID number to make a call to the selected ID in allfleets (Supervisor call).Note:◆Broadcast and Supervisor calls are programmed functions that cannot be made with a keypad.◆The ID range may be limited by programming.