Kenwood TK-780 Programming Instructions Manual

Contents

6Defining a Talk Group for Data UseThere are two places in the system information screen that you have to define a talkgroup as being a data talk group.First, select the data talk group with your cursor, and press the F9 Key. This will bringup the System Data screen as shown in the figure below. Program the DataSystem/Group for the system and group number in your radio. This value will varybased on how many systems and groups are programmed into your radio.+------------------------------------- +¦ System Data ¦¦------------------------------------- ¦¦ System Name : [ 1 ] ¦¦ System Lockout : [***] ¦¦ Scan Weight : [*] ¦¦ Auto TEL Search : [N o ] ¦¦ TA Busy Ch LOut : [No ] ¦¦ Wide/Narrow : [******] ¦¦ Fix ID 1st 2nd ¦¦ ID : [ ] [ ] ¦¦ Call Indicator : [***] [***] ¦¦ Horn Alert : [***] [***] ¦¦ Opt Signalling : [****] [****] ¦¦ Block ID's Start Stop ¦¦ Telephone : [ - ] ¦¦ TX Inhibit : [ - ] ¦¦ Decode : [ - ] ¦¦ Data System/Group : [ 1 - 2 ] ¦¦ Data Delay Time : [ 15]ms ¦+------------------------------------- +Second, you must define the talk group as data in the group information screen. Toaccess the group information screen, select the data talk group with your cursor and pressthe F10 key. The figure below shows how to define the talk group as data.+---------------------------------- +¦ Group Data 2 ¦¦---------------------------------- ¦¦ Encode ID : [151] ¦¦ Decode ID : [151] ¦¦ Group Name : [Data Chan ] ¦¦ TX Power : [****] ¦¦ Call Indicator : [No ] ¦¦ Horn Alert : [No ] ¦¦ Option Signalling : [None] ¦¦ Group-Lockout : [No ] ¦¦ Transpond : [No ] ¦¦ Talk Around : [No ] ¦¦ Compander : [***] ¦¦ Home Group : [***] ¦¦ PTT ID : [Off] ¦¦ Data : [Yes] ¦+---------------------------------- +Program theappropriateSystem/Group forthe data groupSet Data to Yes