Kenwood TK-863G Instruction Manual

Also see for TK-863G: Brochure & specs Brochure & specs Service manual Brochure & specs

Contents

10TRANSMITTINGNote: Before transmitting, monitor the group to make sure it is not already in use. If the selectedsystem is programmed with QT (Quiet Talk) or DQT (Digital Quiet Talk), remove the microphonefrom the hook to disable QT or DQT, then listen to the group to make sure nobody is talking on it. Ifthe selected system is not programmed with QT or DQT, simply listen to the group to make surenobody is talking on it. In this case, you need not remove the microphone from the hook.1 Select your desired system and group using the System and Group keys.• If the group is busy, wait until it becomes free.2 Press and hold the PTT switch, then speak into the microphone. Release thePTT switch to receive.• For best sound quality at the receiving station, hold the microphone approximately1.5 inches (3 ~ 4 cm) from your mouth.3 When your conversation is finished, return the microphone to its hanger.RECEIVING1 Select your desired system and group using the System and Group keys.(If the Scan function has been programmed, you can switch it ON or OFFas desired.)2 When you hear the dispatcher’s voice, readjust the volume as necessary.CONVENTIONAL OPERATION

/ 17

Related manuals for Kenwood TK-863G