8 EchoLinkTM-D710A/E CONTENTS 63Figure 8-41 Sysop Setup Window: Options TabThe initial settings are fine to use. No changes are necessary. Finally, click the RF Info tab.Figure 8-42 Sysop Setup Window: RF Info TabAt this point, you must enter your link station information. While initially experimenting and settingup your station, it’s best not to enter this information. This information is sent to the EchoLinkserver. After you disconnect from the EchoLink server, this information will continue to be publicvia the server for some time. Heed this warning!This is the information that you can enter:Lat: Enter latitude.Lon: Enter longitude.Freq: Enter operational frequency.PL (if any): Enter Tone frequency for access (e.g. the CTCSS frequency configured ina TM-D710A/E).Power (W): Select from the dropdown list the power closest to your transmit power.HAAT (ft): Select from the dropdown list the height closest to your antenna height.Antenna Gain (dB): Select from the dropdown list the gain closest to your antenna gain.Directivity: Select from the dropdown list the direction of maximum antenna gain. For anomnidirectional antenna, select “Omni”.Report Status via APRS: Do not check.
