Kenwood TRC-80 Instruction Manual
Also see for TRC-80: Instruction manualService manual
                      |
MENU SETUPSome functions on this radiotelephone are selected orconfigured via a software-controlled Menu instead ofphysical controls on the radiotelephone. Once familiarwith the Menu system, you will appreciate the versatilityit offers.CHANGING MENU SETTINGS|The [MENU] button must be activated by your ;Dealer to function as described here.The following procedure explains how to check orchange any of the Menu items.1 Press [MENU].2 Press [MODE] or [DATA] to select the desired Menunumber.¢ [DATA] increments the Menu number; [MODE]decrements the Menu number.« Amessage that briefly describes the selectedMenu item scrolls. This message can beinterrupted by turning the CHANNEL selector.POWE3 Turnthe CHANNEL selector to choose the desiredselection for the Menu number.4 Press [MENU] again to exit Menu mode.Settings for Transmit Power and Channel Lockout canonly be done by accessing Menu Setup. Also, thesettings for these functions apply only to the channelselected at the time the setting is changed. Therefore,before changing these functions, first select theapplicable channel. Refer to additional information forChannel Lockout on page 11.10MENU CONFIGURATIONNote:@ Menu Nos. 08~15 may be unavailable depending on the DealerSettings.@ Without the optional KPE-1 Selective Cail Unit installed, MenuNos. 06 and 07 can be accessed, but they cannot be used.: ow eaNB(Noise Blanker) OFF/ ONAlphanumeric display OFF/ ON2 kMemory channelOFF/05 Busy stop Time operated (TO)/Carrier operated (CO)[06|Selesioncat| OFF/ON |Identification codeFoe| wvcode | vm o00-000 |Foe| wBote | ven 00-000AAAAAAA~ZZZZZZZ,0000000~9999999,:1*%<" is used as a wild card.miscellaneous symbolsAAAAAAA~ZZZZZZZ,0000000~9999999,miscellaneous symbolsAAAAAAA~ZZZ2Z22Z2ZZ,0000000~9999999,miscellaneous symbolsAAAAAAA~ZZZ2ZZZZ,0000000~9999999,miscellaneous symbolsNote: Default selections are shown in bold face in the above table.MEMORY BACKUPThis radiotelephone contains an EEPROM to retainchannel data for channels 1~10. Turning OFF thePOWER switch, or a power failure, will not erase thismemory.A lithium battery is installed that preserves Display andsetting data whether the radiotelephone is switched ONor OFF. The lithium battery should last forapproximately five years. When the battery discharges,erratic information may appear on the Display. YourKENWOOD Dealer should replace the lithium batterywhen the battery becomes discharged. |
Related manuals for Kenwood TRC-80
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine