Kenwood TS-2000 Service Manual
Also see for TS-2000: Instruction manualInstruction manualService manualSpecificationsService manual
                                                                                                                                                                           | |
Contents
| 
98TS-2000/XRequired Test Equipment1. DC Voltmeter (DC V.M)1) Input resistance : More than 1MΩ2) Voltage range : 1.5 to 1000V AC/DCNote : A high-recision multimeter may be used. How-ever, accurate readings can not be obtained for high-impedance circuits.2. DC Ammeter1) Current range : 100mA, 1.5A, 15A, high-precision am-meter may be used.3. RF VTVM (RF V.M)1) Input impedance : 1MΩ and less than 3pF, min.2) Voltage range : 10mV to 300V3) Frequency range : 10kHz to 500MHz4. AF Voltmeter (AF V.M)1) Frequency range : 50Hz to 10kHz2) Input resistance : 1MΩ or greater3) Voltage range : 10mV to 30V5. AF Generator (AG)1) Frequency range : 200Hz to 5kHz2) Output : 1mV or less to 1V, low distortion6. AF Dummy Load (DM. SP)1) Impedance : 8Ω2) Dissipation : 3W or greater7. OscilloscopeRequires high sensitivity, and external synchronizationcapability (150MHz or greater).8. Sweep Generator (Sweep G.)1) Center frequency : 50kHz to 140MHz2) Frequency deviation : Maximum ± 35kHz3) Output voltage : 100mV or greater9. Standard Signal Generator (SSG)1) Frequency range : 50kHz to 60MHz2) Output : –133dBm/0.1μV to 7dBm/1V3) Output impedance : 50Ω4) AM and FM modulation can be possibleNote : Generator must be frequency stable.10. Frequency Counter (f. counter)1) Minimum input voltage : 50mV2) Frequency range : 150MHz or greater11. Noise Generator (Noise G.)Must generate ignition noise containing harmonicsbeyond 30MHz.12. RF Dummy Load1) Impedance : 150Ω and 50Ω2) Dissipation : 150W or greater13. Linear Detector1) Frequency range : 60MHz or greater14. Power Meter1) Impedance : 50Ω2) Dissipation : 300W continuous or greater3) Frequency limits : 60MHz or greater15. Spectrum Analyzer1) Frequency range : 100kHz to 140MHz or greater2) Bandwidth : 1kHz to 3MHz16. Detector1) For adjustment of BPF2) For adjustment of PLL/VCO BPF17. Directional Coupler18. Monitor ReceiverR-1000 class19. MicrophoneMC-43S or MC-60S820. Tracking Generator21. Distortion Meter22. Double Signal Pad (50Ω)ADJUSTMENTININOUTOUTTo RF unit To Oscilloscope10P 1N60561N60100PININOUTOUTTo PLL unit To Oscilloscope5P 1N601N60100P |
Related manuals for Kenwood TS-2000
manualsdatabase
Your AI-powered manual search engine