Key Behavior Refer to.[ M.IN] PressDisplays the memory channel list screen. 9-1Registers a memory channel. 9-1Switches the menu mode item. 3-1[ Press Registers a quick memory channel. 9-5Switches the menu mode item. 3-1[Q-MR>]Press Calls up a quick memory channel. 9-5Switches the menu mode item. 3-1Press andhold Deletes all quick memory channels. 9-5[ ] Press Switches the menu mode item. 3-1.[MENU] Press Turns ON/OFF the menu mode. 3-1[TF-SET] Press Turns ON/OFF TF-SET. (ON while it is being pressed.) 5-2.[MONI]Press Turns ON/OFF the TX monitor function. 8-3Press andhold Displays the TX monitor level configuration screen. 8-3[CAR] Press Displays the carrier level configuration screen. 5-8.[AGC]Press Switches the AGC time constant [FAST, MID, SLOW]. 5-2Press andhold Displays the AGC configuration screen. 5-2[NR]Press Switches the mode of the noise reduction function [OFF/NR1/NR2]. 6-7Press andholdDisplays the NR1 configuration screen. (When Noise Reduction 1 is ON)Displays the NR2 configuration screen. (When Noise Reduction 2 is ON) 6-7[NB1]Press Turns ON/OFF the Noise Blanker 1. 6-5Press andhold Displays the NB1 configuration screen. 6-5[NB2]Press Turns ON/OFF the Noise Blanker 2. 6-5Press andhold Displays the NB2 configuration screen. 6-6.[BC] Press Switches the mode of the beat canceler function [OFF/BC1/BC2]. 6-8[NCH]Press Turns ON/OFF the notch filter. 6-6Press andhold Switches the bandwidth of the notch filter [Normal, Middle, Wide]. 6-7.[RIT]Press Turns ON/OFF the RIT function. 5-7Press andhold Shifts the RX frequency via RIT. 5-7[XIT]Press Turns ON/OFF the XIT function. 5-7Press andhold Shifts the TX frequency via XIT. 5-7[CL] Press Clears the RIT or RIT/XIT frequency. 5-7NAMES AND FUNCTIONS OF PARTS 22-3
