Kenwood VR-605 Instruction Manual

Also see for KRF-V4060D: Instruction manual Service manual

Contents

Kenwood VR-605 Instruction Manual Manual pdf 17 page image

Preparing for surround soundTo enable you to obtain optimum enjoyment from the receiver’s lrstenrngmodes, make sure to complete the speaker settings (subwoofer. front,center, and surround speakers) as described &low.For V&615 (HTB model), do not select “LRG” (large) for front, center,and surround speakers as this will cause the speakers to malfunctionMULTI CONTROLPOtiER ON/OFF(KRF-VSOSOD/ SEi UPa Turn on the power to this receiver by pressing POWER ON/STANDBY 0 (for VR-605/615) or POWER ON/OFFend ON/STANDBY 0 (for KRF- V506OD/V406OD/V556OL7)or POWER 0key.0 Press the SET UP key to enter the SET UP mode and use the 0 UsetheMULTlCONTROLknoborkeystoselecttheappropriateMU1 Tl CONTROL knob or keys for the following displays. center speaker setting.cI SPSETUP:i TESTTONES DISTANCE4 EXITThe flow of the SET UP IS as follows,If you selected “LRG” as the front speakers setting,Lsr CNTR NML (normal) : An average srze center speaker ISconnected to the receiver.‘5’ CNTR LRG (large) : A large center speaker is connected tothe receiver3’ CNTR OFF : Center speaker settrng mode to thereceiver IS OFF.S”rri”“d R4 SR ESubwoofer SLFie-mrx 9SW SR4s,Ls’wB Select a speaker system.0 Select SP SETUP and press the SET UP key again so that thesubwoofer setting indication “SUBW ON” appears.e Use the MULTI CONTROL knob or keys to select theappropriate subwoofer setting.ii SUBW ON : Subwoofer setting mode to the receiver IS ON.C? 2 SUBW OFF : Subwoofer setting mode to the recerver is OFF.l The rnrtral settrng IS “SUBW ON”l When the setting “SUBW OFF” IS selected, the front speakersare automatrcally set to “FRNT LRG” and the procedure skrps tostep 0.Before step 0, press the SET UP key to accept the setting.l Whensubwooferoutput sound IS requrred, select “FRNTNML”.0 Press the SET UP key to accept the setting.*The front speakers settrng Indication “FRNT LRG” appears.0 UsetheMULTlCONTROLknoborkeystoselecttheappropriatefront speakers setting.[:f FRNT NML (normal) : Average sze front speakers areconnected to the receiver.2’ FRNT LRG (large) : Large front speakers are connected tothe receiverl For VR-615 (HTB model), do not select “LRG” (large) for frontspeaker as thus wrll cause the speaker to malfunction.l For”FRNTLRG”selectron. nosoundwrll beheardfromsubwooferspeaker even when It IS set to ON. However, if you selectCINEMA EQ when subwoofer is selected, you wrll be able tohear sound from the subwoofer.When in STEREO mode, thesound goesdirectlytofrontspeaker.0 Press the SET UP key to accept the setting.*The center speaker setting indrcatron “CNTR” appears.l For VR-615 (HTB model), do not select “LRG” (large) for centerspeaker as thus wrll cause the speaker to malfunctron.If you selected “NML” as the front speakers setting,Ci CNTRON : Center speaker settmg mode to thereceiver IS ON..2 CNTR OFF : Center speaker setting mode to thereceiver IS OFF.@ Press the SET UP key again to accept the setting.*The surround speaker settrng rndrcation “SURR” appears.0 Use the MULTI CONTROL knob or keys to select theappropriate surround speaker setting.If you selected “LRG” as the center speaker setting,i SURR NML (normal): Average srze surround speakers areconnected to the receiver2 SURR LRG (large) : Largesurroundspeakersareconnectedto the recerver.3 SURROFF : Surround speaker settrng mode to therecetver IS OFF.Continued to next page17EN