Kenwood VR-606 Service Manual

Also see for VR-606: Instruction manual Instruction manual Instruction manual Service manual

Contents

VR-606/61629SPECIFICATIONSIO sectiond power output during STEREO operation0 watts per channel minimum RMS, both channels dri-n, at 8Ω from 40 Hz to 20 kHz with no more than 0.7%al harmonic distortion. (FTC)tive power output during SURROUND operationRONT (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channelriven) ......................................................100 W + 100 WENTER (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channelriven).....................................................................100 WURROUND (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω onehannel driven).........................................100 W + 100 WUBWOOFER (80 Hz, 0.7% T.H.D. at 8Ω one channelriven) (VR-616) .....................................................100 Wharmonic distortion.................0.05% (1 kHz, 50 W, 8Ω)uency responseD ..................................20 Hz ~ 70 kHz, +0 dB, -3.0 dBal to noise ratio (IHF'66)D............................................................................95 dBsensitivity / impedanceD ............................................................550 mV / 47 kΩVD/6CH INPUT .....................................550 mV / 47 kΩut level / impedanceAPE REC .................................................550 mV / 1 kΩRE OUT (SUBWOOFER) (VR-606) .........1.5 V / 2.2 kΩcontrolASS ..................................................±10 dB (at 100 Hz)REBLE ..............................................±10 dB (at 10 kHz)ness controlOLUME at -30dB level........................+8 dB (at 100 Hz)ITAL AUDIO sectionpling frequency ..........32 kHz, 44.1 kHz, 48 kHz, 96 kHzlevel / impedance / wave lengthptical ..................(-15 dBm ~ -21 dBm), 660 nm ±30 nmoaxial......................................................0.5 Vp-p / 75 ΩEO sectionO inputs / outputsIDEO (composite)......................................1 Vp-p / 75 ΩEO inputs / outputsVIDEO (luminance signal) ........................1 Vp-p / 75 ΩVIDEO (chrominance signal).............0.286 Vp-p / 75 ΩFM tuner sectionTuning frequency range .....................87.5 MHz ~ 108.0 MHzUsable sensitivity (MONO)......1.3 μV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)50dB quieting sensitivitySTEREO .......................................28 μV (75 Ω)/ 40.2 dBfTotal harmonic distortion (1 kHz)MONO .............................................0.5% (71.2 dBf input)STEREO..........................................0.7% (71.2 dBf input)Signal to noise ratio (1 kHz, 75 kHz DEV.)MONO ............................................75 dB (71.2 dBf input)STEREO ........................................68 dB (71.2 dBf input)Stereo separation (1 kHz) ............................................40 dBSelectivity (±400 kHz)....................................................70 dBFrequency response .......(30 Hz ~ 15kHz), +0.5 dB, -3.0 dBAM tuner sectionTuning frequency range10 kHz step......................................530 kHz ~ 1,700 kHzUsable sensitivity (30% mod., S/N 20dB).16 μV / (600 μV/m)Signal to noise ratio (30% mod. 1 mV input) .................50 dBGENERALPower consumption........................................................2.2 AAC outletSWITCHED .............................(total 150 W, 1.25 A max.)Dimensions.......................................W: 440 mm (17-5/16")H: 143 mm (5-5/8")D: 303 mm (11-15/16")Weight (Net)..................................................7.7 kg (17.00 lb).KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice..The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

/ 23

Related manuals for Kenwood VR-606