Kenwood VR-9050 Instruction Manual

29 ENAmbience effectsWhen the Dolby Digital or Dolby Digital EX signal is input :1 DOLBY DIGITAL : Dolby Digital surround.2 DOLBY D EX : Dolby Digital EX surround.3 ŸD+PLIIx MOVIE : Dolby Digital+Pro Logic IIx surroundMOVIE mode.4 ŸD+PLIIx MUSIC : Dolby Digital+Pro Logic IIx surroundMUSIC mode.5 PLIIx MOVIE : Dolby Pro Logic IIx surround MOVIEmode.*6 PLIIx MUSIC : Dolby Pro Logic IIx surround MUSICmode.*7 PLIIx GAME : Dolby Pro Logic IIx surround GAMEmode.*8 PLII MOVIE : Pro Logic II surround MOVIE mode.*9 PLII MUSIC : Pro Logic II surround MUSIC mode.*0 PLII GAME : Pro Logic II surround GAME mode.*- PRO LOGIC : Pro Logic surround.*= STEREO : Normal stereo playback.(* This mode can be selected only when 2 channel stereo signalcomes in.)When you select DOLBY DIGITAL“DOLBY DIGITAL” will be displayed.SBSWLSL SRC RSP MUTEA B CLIPLFEDIGITAL DOLBY DIGITAL STEREOAUTO DETECTWhen the DTS or DTS-ES (matrix or discrete) signal is input :1 DTS-ES Mtrx 6.1 : DTS-ES MATRIX 6.1 channel surround.2 DTS-ES Dscrt 6.1 : DTS-ES DISCRETE 6.1 channel surround.3 DTS : DTS 5.1 channel surround.4 DTS+NEO:6 Cin : DTS+Neo0:6 surround CINEMA mode.5 NEO:6 CINEMA : Neo:6 surround CINEMA mode.*6 NEO:6 MUSIC : Neo:6 surround MUSIC mode.*7 DTS 96/24 : DTS 96/24 playback mode.8 STEREO : Normal stereo playback.(* This mode can be selected only when 2 channel stereo signalcomes in.)When the analog signal or the digital signal (except forDOLBY DIGITAL or DTS signal) is input :1 PLIIx MOVIE : Pro Logic IIx surround MOVIE mode.2 PLIIx MUSIC : Pro Logic IIx surround MUSIC mode.3 PLIIx GAME : Pro Logic IIx surround GAME mode.4 PLII MOVIE : Pro Logic II surround MOVIE mode.5 PLII MUSIC : Pro Logic II surround MUSIC mode.6 PLII GAME : Pro Logic II surround GAME mode.7 PRO LOGIC : Pro Logic surround.8 NEO:6 CINEMA : Neo:6 surround CINEMA mode.9 NEO:6 MUSIC : Neo:6 surround MUSIC mode.0 STEREO : Normal stereo playback.• Dolby Digital or DTS signal having more channels than the maximumnumber of playback channels available using the receiver’s currentsettings is input, downmixing is performed to match the number ofavailable channels.3DSP mode.DSP can produce these effects without spoiling the sound quality ofthe original music or video source.This mode can be selected when digital signals other than DolbyDigital or DTS, or analog signal come in.1 Pressing the DSP key or DSP MODE key will display thecurrent DSP MODE status.2 Each press of the key will switch to the next status as shownbellow:1 ARENA : DSP surround ARENA mode.2 JAZZ CLUB : DSP surround JAZZ CLUB mode.3 THEATER : DSP surround THEATER mode.4 STADIUM : DSP surround STADIUM mode.5 DISCO : DSP surround DISCO mode.• The DSP mode selection is displayed for approximately 3 seconds.4Adjust the volume.Switching the LISTEN mode to STEREO temporarilyPressing the STEREO key changes the currently selected LISTEN modeinto STEREO. It will be changed back to the original LISTEN mode bypressing the STEREO key again.• If the power is turned off and turned back on, or the input selector isswitched to another and switched back, the LISTEN mode will be backto the original one.Notes• Depending on the type of the signal or speaker setting, some listeningmodes cannot be selected.• When playback is started, the sound may be cut or interrupted beforethe input source is confirmed as Dolby Digital.• To enjoy Dolby Digital surround (as well as all the other listening modes)from a single component, be sure to use a Dolby Digital compatiblesource component.