Kenwood VZ-5000 Instruction Manual

Contents

10 EnglishSystem Setup FunctionSystem Setup Screen-2Setting the AV Output Mode [AV-OUT]Touch Setting[¶NORMAL] Picture/sound with monitor picture.[¶VIDEO 1]/ Picture/sound from AV IN1 terminal.[¶NAV][¶VIDEO 2]/ Picture/sound from AV IN2 terminal.[¶R-CAM][¶TV] Picture/sound from television.(During the KTC-V500N or KTC-V500P isconnected)FM Transmitter Function [FM-TX]You can use the FM transmitter function to hear thesound of the source set in AV OUT from your car FMradio.Touch Setting[¶ON] The FM transmitter is turned on.[¶OFF] The FM transmitter is turned off.Selecting the frequency:Press the [2] or [3] button to change the frequency by0.1 MHz step.Selecting the VIDEO 1/NAV level:Press the [2] or [3] button.Selecting the VIDEO 2/R-CAM level:Press the [2] or [3] button.• Be sure to select a frequency that is not the same as abroadcast station in your area.• The auto seek function on your car radio may not stop at theFM transmitter frequency. In this case, use the manual seekfunction to set the radio to the FM transmitter frequency.Switching the Setup Screen -1Touch the [ 2 ] button.Exit the System Setup-2 ScreenTouch the [RETURN] button.Return to the setup menu screen.TV Area Setting ScreenSetting the TV Area(During the KTC-V500P is connected)Select the area for TV broadcast viewing.Selecting the Preset Bands:Touch the [TV 1] or [TV 2] button.Selecting the Reception Area:Touch the [¶G1] - [¶G5] button.Select the channel setting for your country as follows.The reception area can be set for two separate preset bandsTV1 and TV2.Exit the TV Area Setting ScreenTouch the [RETURN] button.Return to the tuner setting menu screen.ChinaSingaporeMalaysiaThailandBurneiHong KongIndonesiaAustralia[¶G1][¶G2][¶G3][¶G4][¶G5]PAL-DPAL-B/GPAL-IPAL-B/G