Kenwood XD-855 Instruction Manual

Also see for XD-655: Instruction manual

Contents

Kenwood XD-855 Instruction Manual Manual pdf 36 page image

36 ENUSING EXTERNAL UNITSVideo/Auxiliary (Audio signal) inputTo listen to or record signals from external sourcesthrough this unit :1 Use a separately available RCA cord to connectthe desired external unit to the VIDEO/AUXsockets.(red = right channel, white = left channel)• When using video equipment (Laser Disc playeror VCR), be sure to connect the audio output tothis unit and the video output to a television.2 Press the ON/STANDBY button to turn thepower on.3 Press the VIDEO/AUX button.4 Operate the external unit.5 To record the sound from the external unit, per-form steps 2 - 4 of the “Recording from thebuilt-in radio” section on page 31.Note :• To prevent hum interference, do not place thisunit near a television receiver.Headphones• Before plugging in or unplugging the head-phones, make sure the volume level is reduced.• Be sure your headphones have a 3.5mm (1/8”)diameter plug and are between 16 Ω and 50 Ωimpedance. The recommended impedance is32 Ω.• When headphones are connected, the speak-ers are disconnected automatically. Adjust theVOLUME CONTROL for the desired volume.To the line output socketRCA cord