27OperationsXD-DV9 (EN/T,M,X)1 When an ANGLE mark is shown,press the ANGLE key on the re-mote.2 Use the cursor up/down (5/∞) keyto select the desired screen angle.3 Press the ENTER key.4 Use the cursor left/right (2/3) keyto determine whether or not theANGLE mark will be displayed.ANGLEENTERANGLE : 5 5/6 ∞ MARK : 2 ON 3ENTERANGLE : 5 5/6 ∞ MARK : 2 OFF 3DVDSelecting the Desired ScreenAngleWhen a DVD contains multiple angles of a particularscene, you can select the Angle function.DVD VCDUsing the Zoom functionWhen a DVD/VCD contains zoom function of a par-ticular scene, you can select the zoom function.Check to see if ANGLE ( ) marks present at thescreen.ENTER1 During playback or pause mode,press the ZOOM key on the remote.2 Use the cursor left/right (2/3) orup/down (5/∞) key to select thepart of the screen you want tozoom.3Press the ENTER key.ZOOMENTERENTERx2x4normalDuring DVD playback,press ENTER to zoom in2x/ 4x/normal in order.x2normalDuring VCD playback,press ENTER to zoomin 2x/normal in order.Playback of discsANGLE : 5 1/6 ∞ MARK : 2 ON 3
