Kenwood XR600-1 User Manual

Also see for XR600-1: Instruction manual

Connection /WARNINGParticular attention must be given to making goodelectrical contact at the amplifier-output and speakerterminals.Poor or loose connections can cause sparking orburning at the terminals because of the very highpower that the amplifier can deliver.CAUTION• If sound is not output normally, immediately turn poweroff and check connections.• Be sure to turn the power off before changing the settingof any switch.• If the fuse blows, check wires for shorts, then replace thefuse with one of the same rating.• Check that no unconnected wires or connectors aretouching the car body. Do not remove caps fromunconnected wires or connectors to prevent shortcircuits.• Connect the speaker wires to appropriate speakerconnectors separately. Sharing the negative wire of thespeaker or grounding speaker wires to the metal body ofthe car can cause this unit to fail.• After installation, check that the brake lamps, turn signallamps and windshield wipers work properly.