Kenwood Z-638 Instruction Manual

Kenwood Z-638 Instruction Manual Manual pdf 10 page image

Switching the upper and lower part display.1 Select the Display TypePress the [DISP] button.2 Enter Display Control modePress the [S.A] button."Display Control Mode On" is displayed.3 Switch the Upper part displayPress the [FM] or [AM] button.Switch the Lower part displayPress the [4] or [¢] button.Each time the button is pressed the display switches.The Reference for the display content is after this operation'sexplanation.4 Exit Display Control modePress the [S.A] button.• The same information can't be displayed on the Upper part displayand lower part display.• The Upper part display and Lower part display switching can beselected when "Display Type A" is selected in Switching> (page 9).• When "Display Type B" is selected the Lower part display contentis clock ON or OFF.Switching Upper and Lower Part Display• Demonstration can be selected when "Display Type A" or "DisplayType C" is selected in (page 9).• Only "Display Type A" and "Display Type B" can be selected in "ALLOFF".Switching the information displayed in Standby.1 Enter StandbyPress the [SRC] button.Select the "ALL OFF" display.2 Switch the displayPress the [S.A] button.Each time the button is pressed the display switches as shownbelow.Information DisplayDemonstrationDate & ClockStandby display "ALL OFF"Switching the Standby DisplaySwitching the Full screen display.Press the [S.A] button.Each time the button is pressed the display switches as shownbelow.InformationDemonstrationSpectrum Analyzer 1Spectrum Analyzer 2Spectrum Analyzer 3Spectrum Analyzer 4Spectrum Analyzer 5Full Screen display can be selected when "Display Type C" isselected in (page 9).Switching Full Screen DisplayGeneral features— 10 —EnglishZ638_U.S 01.12.3 4:38 PM Page 10