Kenwood dmx129bt Instruction Manual

Also see for DMX129BT: Quick start guide Quick start guide

10External ComponentsExternal ComponentsUsing external audio/video playersÑ Starting playback1 Connect an external component to the AV-INinput terminal. (P.20)2 Press the <8MENU> button.3 Touch [AV-IN].4 Turn on the connected component and startplaying the source.Ñ For Video playback1 When the operation buttons are not displayedon the screen, touch the display.11 [ ] : You can adjust image quality in videoscreen.[INITIALIZE] : To clear the adjustment.✎ NOTE• When the picture from the rear view camera isdisplayed on the AV-IN screen, the picture outputfrom the Visual Output terminal disappears.Rear view cameraTo use a rear view camera, the REVERSE leadconnection is required. For connecting a rear viewcamera. (P.20)Ñ Displaying the picture from the rearview cameraThe rear view screen is displayed when you shift thegear to the reverse (R) position.• The first touch removes the Caution, and thesecond touch closes the Camera Screen.Ñ To adjust the parking guidelines✎ NOTE• Install the rear view camera in the appropriateposition according to the instruction manualsupplied with the rear view camera.• When adjusting the parking guidelines, make sureto apply the parking brake to prevent the car frommoving.1 Press the <8MENU> button.2 Touch [ ].3 Touch [System].4 Touch [T] or [U] of [Parking Guidelines] and setto [ON].5 Touch [Guidelines SETUP].6 Adjust the parking guidelines by selecting the[ ] mark.7 Adjusting the position of the selected mark.ABC DMake sure that lines A and B are horizontallyparallel, and that lines C and D are of the samelength.✎ NOTE• Touch [Initialize] and then touch [Yes] to set all themarks to their initial default position.Reverse with ATT（-20dB)When the gear is shifted to the reverse (R) position,the volume of the device is adjusted.1 Press the <8MENU> button.2 Touch [ ].3 Touch [System].4 Touch [Reverse with ATT].5 Touch [T] or [U] set to [ON/OFF].✎ NOTE• The setting value is ON (default)