Kenwood eXcelon KDC-X492 Instruction Manual

Also see for KDC MP338 - Radio / CD: Training guide Instruction manual Instruction manual

Kenwood eXcelon KDC-X492 Instruction Manual Manual pdf 12 page image

12 | KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338Menu OperationMenu SystemSet up the following functions;Display Setting Setting overview Source“SECURITYSET”/“SECURITYCLR”Refer topage 12Sets/Resets security code“CLOCKADJUST”Refer topage 13Sets the clock.“DISPLAY” ON*/OFF Turns off the display when nooperation is performed.—“DIMMER”*1,2,3AUTO*/OFF Dims the display in conjunctionwith the light switch of thevehicle.“DIMMER”*4 ON/OFF* Adjusts the brightness ofthe display according to thesurrounding illumination.—“DOT LINE” ON*/OFF Specifies whether to display thered dotted line on the display.“SWPRE”*3,4 REAR*/SUB-WSets the preout output.“AMP”*1,2 ON*/OFF Turns on/off the built-in amplifier.“AMSCONTROL”*1Refer topage 13Controls the connected LXamplifier.—“ZONE2”*1,2,3 REAR*/FRONTSpecifies the destination of AUXinput sound when the Dual Zonefunction is turned on.“SUPREME” ON*/OFF Turns ON/OFF the Supremefunction.“CRSC” OFF/ON* Switches to Monaural to decreasenoise when reception is poor.“NAME SET” Refer topage 14Sets the display when switchedto AUX source.“SCROLL” AUTO*/MANUALSpecifies whether the text isscrolled automatically.—“RECEIVEMODE”Refer topage 14Sets the receive mode of HR radio.“ESN” — Displays the Electronic SerialNumber of satellite radio.“AUX” OFF/ON1*/ON2Sets whether to display AUXduring source selection.“CD READ” 1*/2 Sets the CD read mode.“DEMOMODE”Refer topage 14Specifies whether to enabledemonstration.—*Factory setting*1 Function of KDC-X492.*2 Function of KDC-MP438U.*3 Function of KDC-MP408U.*4 Function of KDC-MP338.Displayed item is depending on currently selectedsource. The mark in Source column shows thesource to which the item is displayed.: Can be set in other than standby state.: Can be set in standby state.: Can be set while Audio file source of CD/USB(excluding iPod).: Can be set during FM reception.: Can be set during Satellite radio source.: Can be set while accessing AUX source.: Can be set while HD Radio source.— : Can be set during all sources.1 Enter Menu modePress the [M.JOG] button for at least 1 second.“MENU” is displayed.2 Select the menu itemPush the Control knob towards up or down.3 Set the menu itemPush the Control knob towards right or left.4 Exit Menu modePress the [M.JOG] button.⁄• Refer to the respective page for information on how toset the items with reference page number.• ”ZONE2” is displayed when ”2ZONE” in

(page 7) is set to ”ON.• Refer to the (page 16) for the details of themenu items.• Strong electrical fields (such as from power lines) maycause unstable sound quality when CRSC is turned ON.In such a situation, turn it OFF.Activating Security Code⁄• You can set the Security Code with a 4 digit number of yourchoice.• The Security Code cannot be displayed or referenced. Makea note of the Security Code and treasure it up.1 Select Security Code item during Menu modeSelect the “SECURITY SET” display.For how to select menu items, refer to System>(page 12).2 Enter Security Code modePress the Control knob for at least 1 second.When “ENTER” is displayed, “CODE” is also displayed.3 Select the digits to enterPush the Control knob towards right or left.4 Select the Security Code numbersPush the Control knob towards up or down.