Kenwood eXcelon KDC-X759 Instruction Manual

Also see for KDC-MP919: Service manual Instruction manual

Function of the KDC-X859Switching to traffic information automatically when a trafficbulletin starts even when you aren't listening to the radio.Display Setting"TI OFF" The Traffic Information function is OFF."TI ON" The Traffic Information function is ON.When it's ON, the "TI" indicator is ON.When a traffic information station isn't being received the "TI"indicator blinks.When a traffic bulletin starts, "Traffic Info" is displayed it and itswitches to traffic information.• During reception of a AM station when the Traffic Informationfunction is turned on ON it switches to a FM station.• During reception of traffic information the adjusted volume isautomatically remembered, and the next time it switches to trafficinformation it's automatically the remembered volume.Receiving other traffic information stations (In tunersource)Press the [4] or [¢] button.Traffic information station switching can be done when listening tothe radio.Traffic InformationTemporarily have reception switched from stereo to mono toreduce multi-path noise when listening to the FM station.CRSC (Clean Reception System Circuit)For the operation method refer to (page20).Auto Memory Entry Function of the KDC-X859/KDC-X759Setting the central frequency boosted by B.M.S.Display Setting"AMP Freq Normal" Boost with the normal central frequency"AMP Freq Low" Drop the normal central frequency 20%B.M.S. Frequency OffsetFunction of the KDC-X859/KDC-X759Adjust the bass boost level of the external amplifier using themain unit.Display Setting"AMP Bass Flat" Bass boost level is flat."AMP Bass +6" Bass boost level is low (+6dB)."AMP Bass +12" Bass boost level is mid (+12dB)."AMP Bass +18" Bass boost level is high (+18dB).• Refer to the catalog or instruction manual for power amplifiers thatcan be controlled from this unit.• For amplifiers there are the model that can be set from Flat to +18dB, and the model that can be set from Flat to +12 dB.When an amplifier that can only be set to +12 is connected to theunit, "AMP Bass +18" won't work correctly even if it's selected.B.M.S. (Bass Management System)Menu system— 34 —English