Toggles ON or OFF the mute control on the built-in amplifier.Turning ON this control enhances the preout quality.Display Setting"AMP Mute OFF" The built-in amplifier activates."AMP Mute ON" The built-in amplifier deactivates.Built-in Amp Mute Setting Function of the KDC-V7022/KDC-722Switching the preout between the rear and non-fading. (In non-fading it outputs without effect from the fader control.)Display Setting"SWPRE Rear" Rear preout."SWPRE N-Fad" Non-fading preout.Switching preout Function of the KDC-X769Setting display/don't display for the System Q factors (Basscenter frequency, Bass Q factor, Bass extend, Middle centerfrequency, Middle Q factor, and Treble center frequency) inAudio control.Display Setting"System Q ON" The System Q factors are displayed."System Q OFF" The System Q factors aren't displayed.System Q SettingThis function sets the opening and closing operation of a panelwhen a disc is inserted and when it is ejected.Display Setting"Ejct Ang Slp" Opens and closes the panel whilemaintaining the angle of the control panelto the set angle."Ejct Ang Lvl" Opens and closes the panel after settingthe angle of the control panel to thehorizontal position.Eject angle setting Setting the time until the faceplate hide operation starts after thepower is turned OFF.The faceplate can be removed only during the set time period.Display and Setting"Off Wait 0s""Off Wait 3s" (Original setting)"Off Wait 25s"… …OFF Wait Time SettingDimming this unit's display automatically when the vehicle lightswitch is turned ON.Display Setting"Dimmer ON" The display dims."Dimmer OFF" The display doesn't dim.DimmerMenu system— 34 —English