4GETTING STARTEDCancel the demonstrationWhen you turn on the power (or after you reset the unit), the displayshows: “CANCEL” \ “DEMO” \ “PRESS” \ “VOLUME” \ “KNOB”1 Press the volume knob.[/N] is selected for the initial setup.2 Press the volume knob again.“DEMO OFF” appears.Set the clock1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [SETTINGS], then press the knob.3 Turn the volume knob to select [CLOCK], then press the knob.4 Press the volume knob to select [CLK ADJ].5 Turn the volume knob to adjust the hour, then press the knob.6 Turn the volume knob to adjust the minute, then press the knob.Press 4 / ¢ to move between the hour and minute adjustment.7 Press and hold to exit.(or)Press and hold SCRL DISP to enter clock adjustment mode directlywhile in clock display screen.Then, perform steps 5 and 6 above to set the clock.12Set the initial settings1 Press SRC to enter [STANDBY].2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to select [INITIAL], then press the knob.4 Turn the volume knob to make a selection (see the table below), then pressthe knob.5 Press and hold to exit.• To return to the previous hierarchy, press .Default: XXPRESET TYPE NML: Memorizes one station for each preset button in each band (FM1/ FM2/FM3/ MW/ LW). ; TYPE MIX: Memorizes one station for each preset button regardless ofthe selected band.KEY BEEP BEEP ON: Activates the keypress tone. ; BEEP OFF: Deactivates.RUSSIAN RUS ON: Folder name, file name, song title, artist name, album name are displayed inRussian (if applicable). ; RUS OFF: Cancels.OFF WAIT Applicable only when the demonstration mode is turned off.Sets the duration when the unit will automatically turns off (while in standby mode)to save the battery.OFF ––– : Cancels ; OFF 20M: 20 minutes ; OFF 40M: 40 minutes ;OFF 60M: 60 minutesAUX SET AUX ON: Enables AUX in source selection. ; AUX OFF: Disables. (➜ 7)CD READ CD READ 1: Automatically distinguishes between audio file disc and music CD. ;CD READ 2: Forces to play as a music CD. No sound can be heard if an audio file disc isplayed.SWPRE SWPRE R/ SWPRE SW: Selects whether rear speakers or a subwoofer are connected to theline out terminals on the rear (through an external amplifier).SPEAKER SP OFF/ SP 5/4/ SP 6 × 9/6/ SP OEM: Selects according to the speaker size (5 inchesor 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.F/W UPF/W xx.xx /N: Starts upgrading the firmware. ; Y/: Cancels (upgrading is not activated).For details on how to update the firmware, see: www.kenwood.com/cs/ce/3
