Kenwood tk-3160-1 Instruction Manual

Also see for TK-2160: Service manual Specifications Instruction manual Instruction manual Specifications

Contents

Kenwood tk-3160-1 Instruction Manual Manual pdf 9 page image

KENWOOD CORPORATION FCC ID: ALH36413110/ALH36423110OPERATING BASICSATING BASICSSwitching Power ON/OFFTurn the Power switch/ Volume control clockwise to switch the transceiver ON.Turn the Power switch/ Volume control counterclockwise to switch the transceiver OFF.Adjusting the VolumeRotate the Power switch/ Volume control to adjust the volume.Selecting a ChannelRotate the Channel selector to select a channel.Clockwise increases the channel number and counterclockwise decreases it.Making a Call1 Select the desired channel.2 Press and hold the Monitor key (Programmed function `Monitor`) to determine whether or not the current channel isbeing used.• If the channel is busy, wait until it becomes free.3 Press and hold the PTT switch, then speak into the microphone in your normal voice.• For best results, hold the microphone approximately 3 to 4 cm (1 1/2 inches) from your lips.4 Release the PTT switch to receive.AUXILIARY FEATURESTime-out Timer (TOT)The TOT is used to automatically inhibit transmission after a specified time elapse. If the PTT switch is held down forlonger than specified time, the transceiver will stop transmitting and a tone will sound. Release the PTT switch, thenpress it again to continue transmitting.

/ 9

Related manuals for Kenwood TK-2160