UBS Hydro IIOperation EN2018-05-02 33 / 606.4 SteeringFig. 9: Steering with single lever and optional double lever1 Second steering lever left2 Steering lever left3 Dead man lever4 Steering lever right5 Second steering lever rightThe steering unit is designed as follows:• The working machine is driven by two wheel motors that are controlledseparately.• Due to the individual wheel drive the wheels can be turned at differentspeeds and in different directions. This makes it possible to drive narrowcurves and, if required, to stop the machine fast or to reverse.• As displayed in the figure, the control panel includes one handle each on thesteering levers (2 and 4). If it is a model with double levers, the optionallyavailable second steering levers (1 and 5) are installed.• If, for instance, a drive shall be started to the left, this can be done byactuation of the left steering lever (2) on the left handle. The more thesteering lever is pulled through, the smaller the turning circle will be until,
