Keysight Technologies E5405A-Pro Series User Manual

Contents

Keysight Technologies E5405A-Pro Series User Manual Manual pdf 68 page image

Keysight E5400-Pro Series Soft Touch User’s Guide 67Circuit Board Design 5Data and Clock Inputs per Operating ModeThe following table shows the number of data and clock inputs for eachconnector on your target system for the various operating modes of yourlogic analyzer.Table 6 16760A logic analyzerNote 1: In the 200 Mb/s, 400 Mb/s, and 800 Mb/s synchronous (state) analysis modes,and the 800 Mb/s eye scan mode, there is one clock input which must be routed tothe clock input on pod 1 (of the master module, in a multi-card set). The clock in-puts on other pods can be assigned to labels and acquired as data inputs.Note 2: In the 1250 Mb/s and 1500 Mb/s synchronous (state) analysis modes, and inthe 1500 Mb/s eye scan mode, the clock inputs on other pods cannot be assignedto labels and acquired as data inputs.Note 3: In asynchronous (timing) analysis, all inputs including clocks can be acquiredand assigned to labels.OperatingModeE5405A17-channeldifferentialsoft touchE5405A with hal f-channeladapter E5386AE5402A or E5406A34-channelsingle-endedsoft touchE5402A orE5406A with hal f-channeladapter E5386ASynchronous (state)analysis200 Mb/s,400 Mb/s,800 Mb/s16 dataplus 1 clock input (seenote 1)N/A 32 dataplus 2 clock inputs(see note 1)N/ASynchronous (state)analysis1250 Mb/s1500 Mb/s8 dataplus 1 clock input (seenote 2)16 dataplus 1 clock input(see note 2)16 dataplus 1 clock input(see note 2)16 dataplus 1 clock input(see note 2)Eye scan mode800 Mb/s16 dataplus 1 clock input (seenote 1)N/A 32 dataplus 2 clock inputs(see note 1)N/AEye scan mode1500 Mb/s8 dataplus 1 clock input (seenote 2)16 dataplus 1 clock input(see note 2)16 dataplus 1 clock input(see note 2)16 dataplus 1 clock input(see note 2)Timing mode 16 dataplus 1 clock input (seenote 3)N/A 32 dataplus 2 clock inputs(see note 3)N/AArtisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com