© Keysight Technologies 2018Printed in USA. October, 2018N1060-90002*N1060-90002*This product is designed for use in InstallationCategory II and Pollution Degree 2 per IEC 1010 and respec-tively.If this product is not used as specified, the protec-tion provided by the equipment could be impaired. This productmust be used in a normal condition (in which all means forprotection are intact) only.No operator serviceable parts inside. Refer servic-ing to qualified service personnel. To prevent electrical shockdo not remove covers.To prevent electrical shock, disconnect the instru-ment from mains before cleaning. Use a dry cloth or oneslightly dampened with water to clean the external case parts.Do not attempt to clean internally.This product has been designed and tested in accordancewith IEC Publication 1010, Safety Requirements for Electron-ic Measuring Apparatus, and has been supplied in a safecondition. The instruction documentation contains informa-tion and warnings which must be followed by the user toensure safe operation and to maintain the product in a safecondition.Install the plug-in module according to the enclosureprotection provided.This instrument does not protect against the ingress ofwater. This instrument protects against finger access tohazardous parts within the enclosure.Safety considerationsBasic Module Configuration1. Connect the input signal to a channel input.2. On N1000A, click Setup > Modules > PrecisionWaveform Analyzer.3. In the dialog box’s Channels tab, turn on the appropri-ate channel.4. In the Clock Recovery tab, select the Input channel.5. Select the Data Rate.6. Configure the Clock Recovery Loop Bandwidth andPeaking settings, as appropriate.7. Click the Lock button.8. On the Precision Timebase tab, click Enable PrecisionTimebase.9. For additional information, consult the N1000A helpsystem.Clock tabStep 3. Turn on channel in Channels tabStep 4. Select Channel SourceStep 8. Enable Precision TimebaseStep 5.Select Data RateStep 6.Loop CharacteristicsStep 7.Click Lock buttonSelect loop bandwidth (LBW)