Keysight Technologies N5224AU-401 Installation Note

Contents

safety notes

6 Installation Note N5225-90105Tools Required for the InstallationCAUTION Use a 5/16-in torque wrench set to 10 in-lbs on all cable connections.About Installing the UpgradeDescription Qty Part NumberT-10 TORX driver - set to 9 in-lbs (1.02 N.m) 1 N/AT-20 TORX driver - set to 21 in-lbs (2.38 N.m) 1 N/A5/16-in (8 mm) nutsetter or open end torque wrench - set to 10 in-lbs (1.13 N.m) 1 N/AProducts affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N5224A and N5225A Option 400Installation to be performed by . . . . . . . . . . . . . . . . . . . . . . Keysight service center or personnel qualified byKeysightEstimated installation time . . . . . . . . . . . . . . . . . . . . . . . . . 2 hoursEstimated adjustment time . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 hourEstimated full instrument calibration time . . . . . . . . . . . . . 4.5 hours