Keysight Technologies N524 A Series Installation Note

Contents

Keysight Technologies N524 A Series Installation Note Manual pdf 67 page image

65Keysight Licensed Funcitionality Upgrade KitN52xxA Microwave Network AnalyzersInstallation NoteB: Manually Setting the PNA Display to 24-BitThis section is only required if, after installing the new SSD that comes withthis upgrade kit (refer to “Step 19. Install the *NEW* N5242-60135Solid-State Disk Drive Assembly (SSDA) from the Upgrade Kit” on page 45),your PNA reboots and does not automatically adjust the display to 24-bit. Ifyour PNA does not have a blurry display, skip this process and continue to the“Step 21. Reinstall the Outer Covers” on page 47.ProcedureIn this procedure, you will need to navigate through the PNA’s BIOS menu,even though you are unable to clearly read the menus.1. During the bootup of your PNA: Press F7 on bootup until the BIOS screenopens.2. In the window that opens, the top row of the screen will have various menuselections: Main, Advanced, Chipset, Boot, Security, and Save&Exit.Use the arrow keys to move the selection from Main over to Chipset, thenpress Enter.3. In the window that opens, the first of three rows should be have white textwhich says Graphics Configuration. With this row highlighted, press Enter.4. In the window that opens, use the down arrow to move the selected text tothe bottom row: LCD Control. Press Enter.5. In the window that opens, use the down arrow to move the selected text tothe bottom row: Panel Color Depth. Press Enter.6. At this point, a small blue box with two items pops up. The top one is "18bit", the bottom one is "24 bit". Select this bottom one and press Enter.7. Now press F10 (to Save & Exit).

/ 70

Related manuals for Keysight Technologies N524 A Series